Drilling - Drilling G81, Deep drilling, Chip breaking, Gun drilling etc.
Tapping - Tapping (G84/G74), Tapping with chip breaking.
Reaming - Reaming (cycle G85).
Milling cyclesy - Circular pocket milling, Bore milling, Thread milling.
Hole Recognition - Automatically finds hole features in any plane and creates drilling operations.
Probe WCS - Probe corners, walls, cylinders and single axis positions.
Inspect surface - Specifie contact points across the surface of the model.
Face - Quick par facing to prepare raw stock.
2D Adaptive Clearing - Optimized roughing toolpath that avoids abrupt direction changes.
2D Pocket - A roughing operation that uses toolpaths parallel to selected geometry.
2D Kontura - Create toolpaths based on a 2D contour.
Slot - Mills a slot by following the slot center line of the slots.
Thread - Use for thread milling cylindrical pockets and islands.
Circular - Use for milling cylindrical pockets and islands.
Bore - Use for bore milling of cylindrical pockets and islands.
Engrave - Machines along contours with V-shape chamfered walls.
2D Chamfer - Machines along contours creating a chamfered surfac.
Adaptive Clearing - Optimized 3D roughing toolpath that avoids abrupt direction changes.
Pocket Clearing - A conventional roughing strategy for clearing large quantities of material effectively.
Horizontal - Automatically detects all the flat areas of the part and clears them.
Contour - Finishing strategy for steep walls.
Parallel - The passes are parallel in the XY-plane and follow the surface in the Z-direction.
Ramp - Ramps down walls rather than machines with a constant Z.
Scallop - Passes at a constant distance from one another by offsetting them inwards along the surface.
Pencil - Toolpaths along internal corners and fillets with small radii.
Radial - A radial toolpath from a given center point.
Spiral - A spiral toolpath from a given center point.
Project - Machine along contours with the center of the tool.
Steep and Shallowé - Machines steep area using Contour passes and shallow areas using Parallel or Scallop passes.
Flow - A multiaxis strategy that follows isocurves of a surface to machine parts with curved sufraces.
Swarf - A multi-axis strategy for machining with the side of the tool.
Multi-Axis Contour - A multi-axis strategy for machining with the tip of the tool along a given contact curve.
Rotary - A multi-axis machining strategy that lets you machine along and around a rotating axis.
Turning Profile - Turning roughing/finishing strategy that creates cuts along the profile.
Turning Groove - Strategy is used for both roughing and finishing of the part using groove tools.
Turning Face - Strategy is used for machining the front side of the part.
Turning Single Groove - Strategy is used for grooving at selected positions only.
Turning Chamfer - Strategy is used for chamfering sharp corners.
Turning Part - Strategy is used for cutting off the part.
Turning Thread - Strategy is used for turning threads.
Turning Secondary Spindle Chuck and Return - Strategy is used for Stock transfer between two spindles.